Testing
===============

Testing equipment:

* Rohde & Schwarz RTB2004 (Fully unlocked)
* JBC soldering iron
* Siglent SDP 1168x
* Sensepeek SP200 oscilloscope probe (200 MHz, 10:1)
* RT-ZP03 probe (300MHz)
* Segger J-Link
* HP 34401A multimeter

.. image:: testing_enviroment.jpg
  :width: 400
  :alt: testing enviroment
  
Testing shows that Everything seems to works fine, but there are few minor flaws:

* Microcontroller can't drive fully proberly FET, somewhere at 98% PWM, signal doesn't go to zero voltage.
* Some noise at FET gate when FAN is connected.

.. image:: waveform.png
  :width: 400
  :alt: testing enviroment

Simple fix for first issue would be using FET driver chip, or use FET that has smaller gate capacitance.